# hardware
## wkrshop day 1
- install fluid NC = usage MS tinybee
- $Wifi/Mode=AP (acces point only)
  - value modifié via fluidTerm 
  - acces point via : http://192.168.0.1/
  - SSID : FLuidNC // mdp : 12345678
- flash config.YAML :
  - http://wiki.fluidnc.com/en/hardware/3rd-party/MKS_TinyBee
- test homing with reprap v1.0 endswitch
- wiring stepper motor : bon sens + homing direction
- save avacnée du jour sur config.yaml
## wrkshop day 2-3
- modif config.yaml
  - modif sens software motor (motor dir : low)
  - retablissement Sta/AP

# Software
## Plotter app
- install [requirements.txt](SOFTWARE/plotter-app/requirements.txt)
  - Run Flask: [app.py](SOFTWARE/plotter-app/app.py) 
  

Bill Of Materials

- 13: Wheel Mini 
- 8: [Aluminium Spacer - 6mm](https://ratrig.com/aluminium-spacer-6mm.html)
- 5: [Eccentric nuts - 6mm](https://ratrig.com/eccentric-spacer-6mm.html)
- 13: [Micro Precision Shim - 6.5 x 5 x 1mm](https://ratrig.com/micro-precision-shim-6-5-x-5-x-1mm.html)
- 4: [T-Nuts - Square Standard M5 for 2020](https://ratrig.com/t-nut-square-m5-1-unit.html)
- 6: [T-Nuts Dropping M5](https://ratrig.com/drop-in-tee-nut.html)
- 20: [Low Profile Screws - 25mm](https://ratrig.com/low-profile-screws-25mm-25-pack.html)
- 10: [Low Profile Screws - 8mm](https://ratrig.com/low-profile-screws-8mm-single-unit.html)
- 6: Aluminium Spacer - 20mm
- 3: [Timing Pulley - 2GT (2mm) - 20 Tooth - For 9mm Belt - 5mm Bore](https://ratrig.com/openbuilds-gt2-2mm-aluminum-timing-pulley-9mm.html)
- 1: [Idler Pulley GT2 20Tooth](https://ratrig.com/idler-pulley-gt-20t-profile-smooth-multiple-sizes-and-types.html)
- 20: [Button Head Screws M3 12mm](https://ratrig.com/button-head-screws-m3-25-pack-length-12mm.html)
- 1: [Solid V Wheel Kit](https://ratrig.com/solid-v-wheel-kit.html)
- 3: [Nema 17 Stepper Motor 40mm](https://ratrig.com/nema-17-stepper-motor.html)
- 3: Câbles JSTXH2.54 vers JSTPH6P
- [V Slut 2040 1m](https://ratrig.com/vslot-2040.html)
- [V Slut 2020 1m](https://ratrig.com/v-slot-2020-standard.html)
- [1 Alimentation 12V 2 ampères Minimum](https://ratrig.com/power-adaptor-12v-euro-plug.html)
- 3: Endswitch Type REPRAP (8€ les 6)
- 1: Fluid NC MKs Tinybee (32€)
- 5: Pilote Motor DRV8825 (10€)
- Timing Belt GT2 3.50m 10€

  -Total ≃ 190€