2.2 KiB
2.2 KiB
hardware
wkrshop day 1
- install fluid NC = usage MS tinybee
- $Wifi/Mode=AP (acces point only)
- value modifié via fluidTerm
- acces point via : http://192.168.0.1/
- SSID : FLuidNC // mdp : 12345678
- flash config.YAML :
- test homing with reprap v1.0 endswitch
- wiring stepper motor : bon sens + homing direction
- save avacnée du jour sur config.yaml
wrkshop day 2-3
- modif config.yaml
- modif sens software motor (motor dir : low)
- retablissement Sta/AP
Software
Plotter app
- install requirements.txt
- Run Flask: app.py
Bill Of Materials
-
13: Wheel Mini
-
6: Aluminium Spacer - 20mm
-
3: Timing Pulley - 2GT (2mm) - 20 Tooth - For 9mm Belt - 5mm Bore
-
3: Câbles JSTXH2.54 vers JSTPH6P
-
3: Endswitch Type REPRAP (8€ les 6)
-
1: Fluid NC MKs Tinybee (32€)
-
5: Pilote Motor DRV8825 (10€)
-
Timing Belt GT2 3.50m 10€
-Total ≃ 190€